How to Make Resin Seashell Coasters

Do you love searching for seashells as you walk the beach? Everyone I know has spent time collecting seashells when they vacation at the beach. But what do you do with the seashells after you bring them home? Instead of letting the seashells collect dust in a box in the attic, why not create seashell coasters with resin? This is a great way to display your beach treasures and enjoy your memories every day.

This post includes affiliate links. Some products were received to facilitate this post.

How to Make Resin Seashell Coasters

There’s nothing like the feeling of walking the beach early in the morning looking for seashells that have washed up overnight. It’s the ultimate treasure hunt as you search for the perfect shell. It really doesn’t matter if you have found a dozen shells that are similar, it’s always a rush as you look for the best shell.

I wanted to find an easy way to display some of our favorite seashells so I could enjoy them every day. When I visited a souvenir shop in Florida a few years ago, I saw some clear glass coasters with seashells tucked inside. I decided to try and make a set of coasters out of resin using my own favorite seashells.

Working with resin can seem a little overwhelming if you have never tried to use it but the process is fairly simple. This was my first time using resin but now that I have started, I am full of ideas for future projects.

Materials Needed

Directions

  • Measure the resin and hardener in two small cups. For this resin, it is exactly a 1:1 ratio.
  • Gently pour each of the two ingredients into a cup and stir carefully for 3 minutes.
  • Stir slowly to minimize bubbles.
  • Let the resin sit for 2-3 minutes after stirring then pour into the silicon mold.
  • Use tweezers to place your small seashells in each of the molds.
  • Remember that you are working from the backside of the coaster so place them in the coaster facing down.
  • You have about 30-45 minutes to arrange your seashells before the resin thickens so take your time.
  • Make sure that none of your seashells stick out over the edge of the mold since this will be turned upside down. You don’t want an uneven coaster or something sharp that will scratch your table.

The instructions say that it will take up to 24 hours to fully harden where you can remove your coaster from the mold. Simply unfold the coaster from the silicone mold and enjoy the finished product.

Package them up with a piece of natural jute and get ready for the holiday gifting season.

Have you got a full collection of seashells stored in your garage or do you have them displayed in your home? I’d love to hear your favorite ideas for enjoying your favorite seashell memories.

Spread the love

Similar Posts

53 Comments

  1. I just bought the coaster molds at Amazon I do hope they work. I have been wanting to make resin earrings but I can’t for th life of me find what to use to attach the molded pieces. I ordered rings but they don’t fit. I was hoping someone could help me to make liking hanging earrings.

    1. If you haven’t figured out the jump rings, you can try looking on firemountaingems.com (if you haven’t already)

  2. Will this brand of resin stay clear/colorless? I did an entire tabletop like this several years ago and that brand of resin soon started to yellow. It is now a less than desirable golden yellow altho I still love it! I know it’s something about an UV reaction and some resins have improved to stay clear. I’d like to be sure I use a totally clear non-yellowing resin for my next project. Thx for all the great info!
    Julie ~ julsofparadise.etsy

  3. I made some a couple weeks ago and my shells kept floating to the top. What do I do about this? I wonder if I push them down after there has been some thickening (drying) of the resin, if it would make a mess of the whole thing. My shells ended up sticking out after it dried.

  4. Are the coasters glossy when they come out of the mold or do you have to treat them with something to make them shiney?

  5. How would you recommend adding color? Food coloring? A particular paint? (Aiming for a blue-ocean look.)
    Thnx!

    1. There are many ways to add color to resin, mica powders are a favorite, there are resin coloring, or alcohol inks, all have differnt effects. You can also use a bit of food coloring, or acrylic paint, but less is more if you add too much you can mess us the chemical balance and it won’t set correctly so only use a few drops or so.

      1. The previous person asked about the how to make the shells sit in the middle of the resin
        Not on the top or sticking out of the bottom

    1. Water and resin do not mix! Never use water with resin, and if you get any resin on your hands do not wash them with soap and water until you remove all the resin from your skin with a paper towel, and alcohol, or a specific resin cleaner. Always use gloves.

  6. Hi Sharon. I have seen others place the shells first, then pour the resin. Specifically, they placed a focal point shell in the middle of the mold, added some shell pieces/crushed shells, a few pearls or doo-dads, and then poured, allowing the pour stream to land on the focal point shell, as it is a bit heavier, and then they were also working from the top down, not from the bottom up. Why do you think the way you did these is best? I’ve only made one table tray using resin, and it did not involve objects; rather fine glitter with swirls so I am apprehensive I will mess this up if I use the wrong approach. What do you think? I adore yours. They are just beautiful. Thank you for sharing. -mary

    1. Hi Mary,
      I don’t know that my way is better than another approach, but this is just the way it worked for me for this project. With the molds that I used, it was just easy to fill them up first and then place the shells. I will have to try them again and place the shells in first. Have fun!

  7. I made these for the first time last week. They looked beautiful but when I examined them closer, some of my seashells had floated to the top. So when I turned them over, I had to file them down. I put a felt backing over it, and no one will know but me. It looks like the ocean. So I will be using them. My family have requested them as their Christmas gift. Can you tell me what I did wrong? Do you need to pack the seashells in the mold? Do I need to pour the resin to the very top of the mold? I want theirs to look perfect??? I love these!

  8. I plan on doing this with some shells my mom collected on various trips. Do you think I could add some sand to these?

  9. Can you put almost anything in? I’m thinking of the little pebbles I collect from beach too?

    Also, I wonder what it would do to a photo; might be nice in the centre? 🤔

    Thanks for inspiring the crafters in us xx

    1. I would love to do the pebbles too. I’m hoping to make those this next week with some pebbles. As for the photo, I don’t know how the resin would work with the paper. But I’m curious if you try it!

    2. Spray the photos with Rustoleum 2X Clear Coat. I would spray with a couple coats making sure it’s dried completely inbetween coats. That should work.

  10. I was wondering where you could suggest that I buy the materials for this project? I would love to make these coasters 😊

  11. I am thinking I could do the same with all of the many colors of sea glass that I have collected over the years. I may even have time to make a design before it hardens. I would love to give this a try! Thanks for the suggestions and sharing.

  12. These are gorgeous. I have all the materials and hope to make these tonight, Are these water resistant? Hope mine turn out close to yours.

  13. I’v e been wanting to do this for my husband with some of his collection of sharks teeth. Does the mold you use have a lip that holds the cup or is it flat and open across the top? I’ve looked for one with a lip but not been successful in finding one. Suggestions?

      1. Any idea what the molds with the lip are called? I want a set with the holder mold too. I just can find it on Amazon

  14. Thanks for your great idea. Now I’m thinking maybe I can make a hot plate holder the same way by using a larger mold. What do you think?

    1. Through the years my mom & I have had different resin hot plates. We would find them at second hand stores. They worked great!
      I plan on making coaster with my sand dollar treasures. My friend had me buy molds from the baking section at the large craft store. Good luck!! 😀

Leave a Reply to Ann Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.